Hydraulic Starters
Kocsis Hydraulic Starters
A Series (CMO) Hydraulic Starters
The A series Hydraulic Starters are not to be underestimated. Although small and extremely light (11 lbs), this starter provides quite a punch with 15 ft-lbs of torque and the ability to turn at 7000 RPM. This translates into extremely fast engine starting of engines up to 9 liters (549 cu. in.). These smaller engines are quite common on lifeboats, which is a prime example when fast starting is paramount.
Kocsis Hydraulic Starters
A Series (CMO) Hydraulic Starters Pdf
Flange type: SPECIAL
Flange to ring gear dimension: 0.098"
Number of teeth: 12
Diametral pitch: 8/10
Pinion outside diameter: 1.825"
Pressure angle: 20°
Rotation: Clockwise
Motor housing: Aluminum
Pinion housing: Aluminum
Barrel: Steel
Piston: Bronze Alloy
Number of pistons: 7
Displacement: 0.50 in³/REV
Speed range: 0-7000 RPM
Drive type: Inertia
Maximum working pressure: 3000 PSI
Duty cycle: Intermittent
Maximum torque: 15 Ft-lbs
Weight: 11.0 lbs
Overall volumetric efficiency: 92%
Recommended fluid: Red hydraulic fluid (MIL-H-5606)
B Series (CMA) Hydraulic Starters
The B series Hydraulic starters are by far the model that is offered in the most variations. This starter is commonly relied upon for dependable starting with the combination of torque and modularity. Providing 45 ft-lbs of torque in a 17 lb package, the B series starter is a workhorse. Depending on conditions, the B series starter cranks up to 18 liter (1098 cu. in.) engines which are quite common in the marine industry.
Kocsis Hydraulic Starters
B Series (CMA) Hydraulic Starters Pdf
Flange type: SAE#3
Flange to ring gear dimension: 2.00"
Number of teeth: 11
Diametral pitch: 6/8
Pinion outside diameter: 2.240"
Pressure angle: 20°
Rotation: Clockwise
Motor housing: Aluminum
Pinion housing: Ductile iron
Barrel: Steel
Piston: Bronze Alloy
Number of pistons: 7
Displacement: 1.35 in³/REV
Speed range: 0-7000 RPM
Drive type: Inertia
Maximum working pressure: 3000 PSI
Duty cycle: Intermittent
Maximum torque: 45 Ft-lbs
Weight: 17.0 lbs
Overall volumetric efficiency: 92%
Recommended fluid: Red hydraulic fl uid (MIL-H-5606)
C Series (CMD-2A) Hydraulic Starters
The C series hydraulic starters fit a vast array of engines with a bit of overlap on both the low and high ends. This model features 72 ft-lbs of torque in only a 35 lb product commonly used in applications which include blenders, gensets and pumping engines.
Kocsis Hydraulic Starters
C Series (CMD-2A) Hydraulic Starters Pdf
Flange type: SAE#3
Flange to ring gear dimension: 2.00"
Number of teeth: 11
Diametral pitch: 6/8
Pinion outside diameter: 2.250"
Pressure angle: 20°
Rotation: Clockwise
Motor housing: Aluminum
Pinion housing: Ductile iron
Barrel: Steel
Piston: Bronze Alloy
Number of pistons: 7
Displacement: 2.00 in³/REV
Speed range: 0-4500 RPM
Drive type: Inertia
Maximum working pressure: 3000 PSI
Duty cycle: Intermittent
Maximum torque: 72 Ft-lbs
Weight: 35.0 lbs
Overall volumetric effiiency: 92%
Recommended fluid: Red hydraulic fluid (MIL-H-5606)
D Series (CMD-3A) Hydraulic Starters
This model convincingly produces 120 ft-lbs of torque in only a 40 lb package. D series Hydraulic starters are common in numerous applications, including fire pumps, gensets and frac pumps. This model of starter dependably starts engines up to 41 liter displacement (2500 cu. in.).
Kocsis Hydraulic Starters
D Series (CMD-3A) Hydraulic Starters Pdf
Flange type: SAE#3
Flange to ring gear dimension: 2.00"
Number of teeth: 12
Diametral pitch: 6/8
Pinion outside diameter: 2.250"
Pressure angle: 20°
Rotation: Clockwise
Motor housing: Aluminum
Pinion housing: Ductile iron
Barrel: Steel
Piston: Bronze Alloy
Number of pistons: 7
Displacement: 3.50 in³/REV
Speed range: 0-4500 RPM
Drive type: Inertia
Maximum working pressure: 3000 PSI
Duty cycle: Intermittent
Maximum torque: 120 Ft-lbs
Weight: 40.0 lbs
Overall volumetric efficiency: 92%
Recommended fluid: Red hydraulic fluid (MIL-H-5606)
E Series (CME5A) Hydraulic Starters
The starter of choice by engine OEM’s, the E series Hydraulic Starter repeatedly produces 200 ft-lb of torque. While weighing significantly less than other gear motor driven starters at 46 lbs, the E Series provides more power per pound than others. The E Series starter can be found in applications including, but not limited to frac pumps, emergency gensets and fire pumps on offshore platforms. The E series Hydraulic Starter can start an engine up to 100 liters (6100 cu. in.).
Kocsis Hydraulic Starters
E Series (CME-5A) Hydraulic Starters Pdf
Flange type: SAE#3
Flange to ring gear dimension: 2.00”
Number of teeth: 12
Diametral pitch: 6/8
Pinion outside diameter: 2.250”
Pressure angle: 20°
Rotation: Clockwise
Motor housing: Aluminum
Pinion housing: Ductile iron
Barrel: Steel
Piston: Steel alloy
Number of pistons: 9
Displacement: 5.88in³/REV
Speed range: 0-3000 RPM
Drive type: Inertia
Maximum working pressure: 3000 PSI
Duty cycle: Intermittent
Maximum Torque: 200 Ft-lbs.
Weight: 46.0 lbs
Overall volumetric efficiency: 92%
Recommended fluid: Red hydraulic fluid (MIL-H-5606)